Hydrogen Peroxide..........................................................6.00%

(Provides A Full .6% Hydrogen Peroxide When Mixed At The Recommended Dilution Ratio)

Lactic Acid......................................................................5.00%

(Provides A Full .5% Lactic Acid When Mixed At The Recommended Dilution Ratio)

Glycerin................................................................... .....20.00%

(Provides A Total 2% Glycerin At The Recommended Dilution Ratio)

Other Inerts...................................................................69.00%

(Includes Buffering Agents, Stabilizing Agents, and Surfactants)

TOTAL...................................................................... ..100.00%

A.) A quality water supply is required for mixing.
      1.) Hardness <2 grains or 35 ppm
      2.) Iron must be 0.0 ppm
      3.) pH 6.5-7.0
B.) CONCENTRATE should be mixed into ready-to-use product within 30 days of delivery,
C.) Keep CONCENTRATE out of direct sunlight and store in a cool place
D.) QUICK-SAN 10X CONCENTRATE contains a high level of Hydrogen Peroxide and should be handled with care. This concentration can be detrimental to the skin, eyes and soft tissues.

IF IN EYES: RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES, IF PRESENT, AND EASY TO DO. CONTINUE RINSING WITH WATAER FOR 15 MINUTES. GET IMMEDIATE MEDICAL ADVICE/ATTENTION.

IF SWALLOWED: RINSE MOUTH WITH WATER. DO NOTH INDUCE VOMITING. GET IMMEDIATE MEDICAL ADVICE/ATTENTION.

IF ON SKIN: IMMEDIATELY REMOVE ALL CONTAMINATED CLOTHING AND WASH BEFORE RE-USE. WASH SKIN WITH PLENTY OF WATER FOR 15 MINUTES. IF SKIN IRRITATION OCCURS, GET MEDICAL ADVICE/ATTENTION

                                       ALWAYS SEEK IMMEDIATE MEDICAL ATTENTION
                                      FOR MEDICAL EMERGENCIES CALL 1-800-424-9300

1. Clean mixing equipment, clean transfer lines, clean and sanitize packing containers.
2. Use only equipment that is compatible with Hydrogen Peroxide and Acids.
3. Start with QUICK- SAN 10X CONCENTRATE.
4. Water volume to QUICK- SAN 10X CONCENTRATE ratio at least 5:1.
5. With agitation, slowly add the QUICK- SAN 10X CONCENTRATE to the water.
6. Use additional water to rinse QUICK- SAN 10X CONCENTRATE residue from QUICK- SAN 10X CONCENTRATE container and add to mixture.
7. Continue mixing to a uniform blend.
8. Continue mixing while adding the balance of water or skin conditioners to the desired concentration.
9. Test for Hydrogen Peroxide strength pH.
10. Assign a lot number , record test results and retain a sample of finished product.
11. Fill properly labeled containers suitable for Hydrogen Peroxide based products.

CAUTION: KEEP OUT OF REACH OF CHILDREN, STORE LOCKED UP.
AVOID CONTACT WITH FOOD. DO NOT TAKE INTERNALLY.

DILUTE 1 PART
QUICK- SAN 10X TEAT DIP
CONCENTRATE
Per 9 Parts Potable,
Tepid Water.

AN AID IN THE
PREVENTION OF NEW
INTRAMAMMARY
INFECTIONS

• QUICK-SAN 10X NPE FREE TEAT DIP CONCENTRATE MUST BE DILUTED BEFORE USE. DO NOT MIX WITH ANYTHING BUT POTABLE WATER.
• WEAR SAFETY EQUIPMENT. A MINIMUM OF SAFETY GOGGLES AND RUBBER GLOVES.
• VENTED BUNGS ARE REQUIRED ON THE CONTAINER OF READY-TO-USE PRODUCT.
• SECURE BUNGS/CAPS TO ENSURE THE PRODUCT INTEGRITY.
• USE DEDICATED EQUIPMENT FOR BLENDING QUICK-SAN 10X CONCENTRATE. DO NOT USE EQUIPMENT THAT HAS CONTACT WITH OTHER CHEMICALS.
• DO NOT LET THE QUICK-SAN 10X CONCENTRATE OR READY-TO-USE PRODUCT COME INTO CONTACT WITH BLACK STEEL AND IRON, SOFT METALS, ALLOYS OF SOFT METALS, WOODOR PAPER.
• DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.
• PROTECT THIS PRODUCT FROM FREEZING

Quick-San 10X Concentrate